KVAR RATING CALCULATOR,CAPACITOR BANK SIZE CALCULATION

-
Image
  Determination of Required Capacitor Rating by measurement 3 Methods are used. 1. Measurement with current and power factor 2.Measurement with recording of Active and Reactive power. 3.Measurement by Reading Meters . 1 . Measurement with Current and power factor The active power P is calculate from the measured voltage V ,apparent current Is and Power Factor P=√3*Voltage*apparent Current*cosψ *10^-3 If the desired power factor cosψ has been specified, the capacitor power rating can be calculate from the following formula: Qc = P. (tan ψactual - tanψ desired) Let's See the Example Measured Apparent Current Is : 248 Amps Power Factor cos ψ1 = 0.86 Desired Cos ψ2 = 0.92 Voltage V :397 V p=√3 * 397 * 248 * 0.86 * 103 P = 146.6 KW Qc= P. (tanψ actual - tanψ desired) = 146.6(0.59 - 0.42) = 24.9 KVAR
Post a Comment

HOW TO CALCULATE THE SPECIFIC GRAVITY OF A SPECIFIC GRAVITY CUP.

-

 First Calculate the Volume 

Steps to Calculate the volume 

1.Measure the Empty weight of the Specific gravity cup

2.Put Distilled water in the cup.

3.Measure the Weight of the cup after filled the distilled water.

4.Measure the temperature of the distilled water

5.Measure the Atmospheric pressure

6.Find the Z Factor from the Chart .

7.Convert the different in mass convert into volume by multiply by Z factor.

Different in Mass = 

Weight of the cup after filled the distilled water. - Empty weight of the Specific gravity cup

    

Second Find the Density of the Distilled water

1.Find the Mass of the Water


2.Find the Volume of distilled water.


3.Density = Mass / Volume

Mass and density is getting from the Volume Section.

   Specific Gravity = Calculated density / Density of distilled water at same temperature


Below One Example to Show how to find the Specific Gravity

Empty Weight of Specific Gravity Cup = 145.874 g

Weight of cup after fill the Distilled water = 230.782 g

Temperature of Distilled Water  = 22 degree Celsius

Atmospheric Pressure = 1008.8 mbar

Z Factor  = 1.0033 µl/mg


Difference in Weight  = 230.782-145.874

                                   =84.908 g

Calculated Volume = 84.908*1008.8

                                  =85.188196 ml



Density = Mass/Volume

             =84.908/85.188196

            =0.99671 g/ml

Convert ml to centimeter cube




Specific Gravity = Density of object / Density of water at same temperature

Density of the Object =0.9967 g/ml 

Here the density is calculated at 22 degree Celsius.

Density of the water at 22 degree Celsius = 0.99777 g/ml 

 Specific Gravity = 0.9967 / 0.99777

                            =0.9989

 

Specific gravity calculator
Specific Gravity Calculator




if You want this excel file please comment in the comment box.







 



Comments

Post a Comment

Popular posts from this blog

TOLERANCE OR MAXIMUM PERMISSIBLE ERROR OR ACCURACY OF VERNIER OF DIGITAL CALIPER AS PER BS EN ISO 13385-1:2019

-
 Calliper  Measuring instrument which evaluates a dimensional quantity of an internal or external feature of the basis of opposing contact from the movement of a slider with a measuring jaw, moving relative to a measuring scale on rigid beam and to a fixed jaw. Maximum permissible error (MPE) values apply to any indication permitted for use of calliper as defined by the manufacturer and when used in accordance with the manufacturer's recommendation .The MPE Values cannot be smaller than the digital step or the scale interval on the circular scale or vernier scale There are mainly three Error are consider in the calliper .Partial Surface contact error , E ( limited by   E MPE ) Shift Error ,S (limited by  S MPE ) Line Contact Error DEFAULT MPE (Maximum Permissible Error ) for metrological characteristics If no MPE values are otherwise stated then the values in tables apply for callipers with a measuring range up to 1000 mm and with analogue scale interv...
Read more

HOW TO CALCULATE THE UNCERTAINTY BUDGET OF pH METER.

-
Image
1. SOURCES OF UNCERTAINTY A. Repeatability (Type A) B. Buffers (Type B) C. Resolution of pH meter (Type B) D. Linearity (Type B) E. Temperature (Type B) 2. Quntification of Sources of Uncertainty A. Repeatability (Type A)                 Repeatability calculation (Type A Uncertainty)                             Formula / Expression of find the Repeatability (Standard uncertainty) Mean = AVERAGE(B4:B13) (X - Mean) = $B4-$C$4                   =UUT Value - Mean (X - Mean)^2 = ($D4)^2                             =( UUT Value - Mean)^2     Standard Deviation = STDEV(B4:B13)    Repeatability (Standard Uncertainty) =  F4/SQRT(10)                ...
Read more

Estimation of Uncertainty in Hardness Measurement & Maximum Permissible Error of Brinell Hardness Testing Machine As Per ISO 6506-2 & ASTM E10-15

-
Image
Source of Uncertainty of Hardness Measurement Certified Value of CRM Determine the User Machine Repeatability Assessment according EN ISO 6506 Uncertainty from the Measured Material. Resolution of the Indentation diameter measuring device.                            1. Certified Value of CRM       Xcrm = 222 HBW 10/3000    Ucrm    = 土 1.4 HBW  (2σ Uncertainty) 2 . Determine the User Machine Repeatability       H₁ = 221     H₂ = 220      H₃ = 220      H₄ = 221      H₅ = 220     Mean = 220  HBW                      b )  Repeatability of  Hardness Measurement                      H₅ = 220              ...
Read more